Electric Chain Hoist, 2200lbs Winch with 10FT Wired Remote Control, 110V Overhead Crane Garage Ceiling Pulley, 1500W Lifting Power System with Emergency Stop Switch (2200 LBS)

SpecificationsHousing Material: Aluminum AlloyChain Material: 20Mn2Hook Material: Manganese SteelType: Single ChainMotor Protection Grade: IP55Insulation Class: FChain Diameter: 6.3mm/0.25inchMotor Type: Pure Copper MotorPlug Type: American Standard Maximum Load Capacity: 1T/2200lbsLifting Speed: 4m/min (13ft/min) Lifting Height: 4m/13ftHandle Switch Wire Length: 3m/10ftMachine Body Size (L*H): 45*15cm/17.7*5.91inchPackage Included1* Electric Chain Hoist1* Lifting Strap1* Chain Bag1* English Manual1* English Inspection Certificate1* Chinese&English WarningNotes1.If the specified object is too large or the object cannot be hung directly on the hook, you will need to tie a longer webbing around the object and then hook the webbing with the hook to lift the object.2.Please ensure that all persons in the immediate area are informed and warned of the need for safety before lifting and moving heavy objects. If necessary, set up a lifting area to remind unoccupied and uninvolved persons that they are not allowed in.3.Please do not leave lifted heavy objects unsupervised for long periods as this may cause injury.4.The lifting weight shall not exceed the maximum load capacity of the product (2200 lbs). Please do not use multiple chain hoists to lift a heavy object or pull a heavy object horizontally.5.Please do not use the chain when it is bent or twisted. Please do not jerk the chain when it is not moving and stop immediately, then start debugging the product.6.Please do not throw the product to avoid damage.7.For the uniformly distributed work cycle, the maximum operation time of the hoist per hour is 25%, and it can handle up to 150 starts per hour. When used for infrequent working hours, it can run for 30 minutes from the cold start, with a maximum of 200 starts per hour.8.Before using the machine, please read carefully all the safety instructions in the product manual.

• HIGH LIFTING EFFICIENCY : The sturdy chain and hooks ensure a strong load capacity of 2200 lbs. With a powerful pure copper motor (1500W), it can lift heavy objects to a height of 13ft with a high speed (13ft/min) to promote efficient work while saving labor costs. Lifting Height: 13ft/4m.
• STABLE PERFORMANCE : The high-speed bearing can ensure that the bearing rotation gap of the motor remains unchanged under long-term use. It has a stable rotor axially with high motor force, which ensures good working performance. Meanwhile, the pure copper motor with good heat dissipation and good stability can provide strong power for lifting with low noise, giving you a more comfortable working environment.
• SAFETY DESIGN : When the anti-rush top limiter touches the hook, the machine can automatically stop lifting to avoid damaging the machine due to excessive lifting. Meanwhile, the hook with a safety latch can rotate 360° to lift objects in all directions and allows the machine to be fixed stably at a high place or connected to most trolleys or beam clamps while promoting safety.
• STRONG AND DURABLE : The aluminum alloy housing, 20Mn2 chain, and manganese steel hook with high strength and good rigidity can resist wear, corrosion, shock, and deformation. Also, the silver point switch, high-speed synchronous gear, and three-wire power cord can be used for a long time and the high protection grade (IP55) allows it to be used in different environments.
• HIGH SAFETY : The highly insulated motor (Class F) can prevent thermal damage and the built-in electronic thermal protector can shut down the motor when its temperature rises or the running time is too long until the motor is completely cooled. The limit switch will be disconnected immediately after power failure. Besides, the reverse phase sequence protection device and dual brake system can also enhance safety.
• WIRED REMOTE CONTROLLER : The wired remote control allows you to control the lifting and lowering functions of the product within 10ft for safe operation. Meanwhile, you can press the emergency stop button on it to quickly brake the product, thus preventing sudden accidents.